Log into OctoPi via the browser and confirm access. Select the printer and then click Request. Under Instance enter a name such as weedoX40 and click OK. In the pop-up window, enter octopi under Ip address. Use Printer Manager to select your printer and click ConnectOctoPrint
Ultimaker cura guide Pc#
Log into OctoPrint on your Cura PC via the browser and connect OctoPrint to your Weedo X40. Set up OctoPi on a Raspberry Pi as described under OctoPrint for Weedo X40.
Ultimaker cura guide install#
Open Cura and install the OctoPrint connection plugin via the Ultimaker Marketplace. In order to send the print job from Cura to the printer, you have to take the detour via OctoPrint.
Ultimaker cura guide software#
You can then print via cloud using Ultimaker Digital Factory, save to removable disk or save the files to the Digital Library.According to my research, printing from Cura via the printer's WLAN interface is not possible because a piece of software is missing. Use the layer slider and simulation view to check important parts of your 3D slice.Įvaluate and improve the printing strategy until you are satisfied. This view is ideal for seeing what the inside of your print will look like and how it will be printed. When the process completes, it will immediately show a ‘preview button’, click it to go to the preview stage. Now that the printer type, configuration and print settings are in place, it’s time to slice the model, with the button in the bottom right corner. This will open the custom mode to manually finetune printing profiles Enable or disable additional adhesive printed parts, the type of adhesion is automatically set by the print profile Enable or disable automatically generated support structures, with either of the available extruders, to get reliable and successful prints when necessary The infill slider can be used to easily set the overall model strength Some Ultimaker 3D printers offer intent-based profiles, fine-tuned to meet specific needs Print profiles. The available profiles for the current configuration are visible.Print settings panel. This panel shows the current printing strategy at a glance, click it to view the entire panel.This mode is ideal if you want to do a quick print with optimized printing profiles.
By default, it opens in the recommended mode. The rightmost button in the stage menu contains the print settings panel, which includes all settings that define the printing strategy. Non-network enabled printers need to be configured manually.
Networked printers will display available configurations in your printer group. Once opened, the panel displays your current print core/nozzle and material setup. The third button in the stage menu contains the configuration panel. Select the printer you would like to use. Network enabled printers will indicate a valid connection with a checkmark icon. The second button in the stage menu contains the printer selection panel. The model will now be loaded and shown on the 3D viewer. Select the model you want to prepare for printing and open it. The button is in the top left corner and is the first button in the stage menu. The easiest way to open 3D models is by the ‘open file’ button. Note: Ensure to have Ultimaker Cura installed correctly before starting this guide.
0 kommentar(er)
